The core advantages of green silicon carbide in cemented carbide sandblasting绿碳化硅在硬质合金喷砂中的核心优势：
| 优势维度Advantage Dimension | 具体说明 |
|---|---|
| 极高的硬度Extremely high hardness | 莫氏硬度达9.5，仅次于金刚石，足以有效切削硬质合金。 Its Mohs hardness reaches 9.5, second only to diamond, and is sufficient for effectively cutting hard alloys. |
| 优异的自锐性Excellent self-renewal ability | 磨粒在工作中会微破碎，持续露出新的锋利刃口，保持高效的切削能力。 During operation, the abrasive particles will undergo minor fragmentation, continuously exposing new sharp edges, thus maintaining their efficient cutting ability. |
| 良好的导热性Good thermal conductivity | 能快速传导喷砂产生的热量，减少工件（尤其是硬质合金刀片等）因局部过热导致性能下降的风险。 It can quickly conduct the heat generated by sandblasting, reducing the risk of performance degradation of the workpiece (especially hard alloy blades and the like) due to local overheating. |
| 粒度均匀，表面质量高Uniform particle size and high surface quality | 颗粒均匀，喷砂后表面粗糙度一致，为后续涂层提供良好附着力。 The particles are uniform, and the surface roughness after sandblasting is consistent, providing excellent adhesion for the subsequent coating. |
| 化学性质稳定Chemically stable | 抗腐蚀，喷砂后残留物少，不影响后续工艺。 Corrosion-resistant. The residue left after sandblasting is minimal and does not interfere with subsequent processes. |
根据你的喷砂目的来确定粒度：
Determine the grit size of green silicon carbide based on your sandblasting objective:
For rapid removal of scale, burrs, and old coatings (coarse cleaning): Choose coarse grit such as F24, F30, or F36.
For achieving a uniform surface and improving coating adhesion (roughening): Choose medium grit such as F46, F60, or F80.
For obtaining a smooth, matte surface (finishing): Choose fine grit such as F100, F120, or F150.
Green silicon carbide F220#:
Green silicon carbide for sandblasting is a green translucent hexagonal non-metallic mineral product made from petroleum coke and high-quality silica as the main raw materials, with salt as an additive, and is produced through 2200° high-temperature smelting in a resistance furnace.
Availabe size for green sic:
Section Sand：0-1mm, 1-3mm, 3-5mm, 5-8mm
F-macrogrit-Sizes-bonded F12F14F16F20F22F24F30F36F40F46F54F60F70F80F90F100F120F150F180F220
JIS-microgrit-Sizes-bonded 240#280#320#360#400#500#600#800#1000#1200#1500#2000#3000#4000#6000# 8000#10000#
Data for green sic:
| Chemcial data | ||||
| SIC | SiO2 | Fe2O3 | F. Fe | C |
| 99%min | ≤0.2 | ≤0.2 | 0.04% | 0.1% |
| Physical data | ||||
| colour | Mohs hardness | Knoop harnedd | Specific Gravity | Melting Point |
| green | 9 | 2600 | 3.2 g/cm3 | 2600° |
green sic package:
